Analogman King of Tone
Analogman King of Tone
*Does not come with the box
*Has some minor little dings
1) Normal Overdrive mode (OD mode): This is the standard King Of Tone sound, which Jim likes best- a little less drive available than a tube screamer. Factory DIP switch setting has this mode on the right (red) channel. This mode can get about 4 times louder than a tube screamer if desired. This mode engages SOFT CLIPPING like most overdrive pedals.
2) CLEAN mode : This mode has less drive, can be used for clean boosts or clearer, louder sounds. It's like a clean boost with an overdrive knob. CLEAN MODE is even less compressed than the standard OD mode. The factory DIP switch setting uses this mode on the left (yellow) channel. This mode can get twice as loud as the OD mode. You can think of the clean mode as the OD mode with the overdrive removed, allowing louder, clearer tone. But the drive knob still functions and can add some drive to the sound, and volume as it's turned up. It's a cool sound with the drive knob cranked! This mode has NO CLIPPING, like most boost pedals.
3) DISTORTION mode : This mode has more drive than the standard OD mode- a touch of hard distortion. The sound is more compressed, yet retains the King Of Tone character. This mode can get about twice as loud as a tube screamer. Think of this mode as a cross between a Boss DS-1 distortion and OD-1 overdrive, with more clarity. We recommend most players use the OD and CLEAN modes. While the DIST mode sounds great, and I like to use it on certain occasions, it does not allow the pedal to get it's absolute BEST tones. You can put an aged single malt Scotch whisky on ice, but it would be a shame to dilute it! The DIST mode is awesome with the HIGHER GAIN option. This mode engages HARD CLIPPING like most distortion pedals and some fuzzes. It's best to turn the OD dip switch down when using the DIST mode, especially with the higher gain option to avoid duplicate clipping (soft and hard clipping together).
Either side can be set to any of the three modes, with the DIP switches. I recommend setting the right side for most distorted sounds and the left for cleaner, then when used together you get more of a volume boost. But if you want more distortion and compression, you can try it the other way around too.
At low DRIVE settings, or when playing softly, there is not much difference between the three modes- they all clean up very nicely as the clipping does not start until you turn the DRIVE knob up higher. This pedal cleans up a lot better than a Tube Screamer type pedal, if you play softly or turn your guitar down they will not have the underlying fuzziness that most pedals have.